CR-160 evaluation board

Cremat, Inc.

Placing an order

US orders should be faxed in, using the US Credit Card Order Form.

Outside the US? Find ordering information here.

The CR-160 evaluation board is intended for the evaluation of the
CR-200 series of shaping amplifiers. When used with a CR-200 shaping amplifier, the CR-160 creates a low noise Gaussian shaping amplifier having input and output BNC connectors, adjustable gain (0 to 1000), reversible polarity, output offset adjustment, and pole/zero compensation. The CR-200 shaping amplifiers are small boards (less than 1 in² in area) having an 8-pin SIP connection on one edge and are available in four different shaping times. To create the fully adjustable shaping amplifier described, one CR-200 amplifier needs to be plugged into the SIP socket on the CR-160 evaluation board.

CR-160 Recently revised!

Use only with CR-200

The CR-160 evaluation board is intended for use with the CR-200 series of shaping amplifiers.

The CR-110 charge sensitive preamplifier has its own evaluation board (CR-150) and should not be plugged into the CR-160.

Home | Products | Contact | About us